Trijicon RMRcc Footprint Optic Cut for Glock

This is a service to cut your factory Glock slide for a Trijicon RMRcc pattern optic (aftermarket slides cut with prior approval). The cut will be .125" deep and the recoil bosses will be milled around the mounting holes. The threaded holes will not break into any of the internal parts of the slide. The mounting holes will be threaded 5-40 for use with the factory screws that come with the optic.

Recommended Sights for Lower 1/3 Co-witness: Ameriglo XL Suppressor Sights (slightly taller than 1/3)

IRON LOCATION: You may choose to keep your irons in the factory location for a double stack slide (G19,G22 Etc), but for the single stack slides (G43/43x/48) the optic will be cut to the rear of the slide and the factory irons will be eliminated. We can recut the iron dovetail in front of the optic if desired.

COATINGS: There is also an option to add Cerakote or bluing to the slide. We offer the Cerakote in Graphite Black, FDE, ODG, Tungsten and Burnt Bronze and it will be applied to the entire slide. The cold bluing will be applied to just the area we cut and your factory finish will remain everywhere else. This type of finish is not as consistent and visually appealing as the Cerakote, but offers some protection for the bare metal. If the Cerakote option is chosen, we will remove your channel liner and install a new one after coating. We also now offer a black nitride coating. The nitride is a much harder finish than the Cerakote and will not wear as quickly. It is similar to many factory coatings and offers a clean uniform black look. We work with a local company to offer the nitride, so lead times are not guaranteed. Estimated 3-4 weeks total turnaround.

For detailed coating descriptions, please see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/

THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only, we are not an FFL and cannot handle frames! We will complete the cut and/or Cerakote and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.

TIMELINE: Once we receive your slide, we will complete the work in within the stated turnaround (Mon-Fri) or less and get it shipped back to you. This includes coating.

PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us, failure to follow this will result in increased turnaround time.

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.