Trijicon RMR Footprint Optic Cut (Also Fits Trijicon SRO & Holosun 407c/507c/508t) for Glock
$85.00 – $170.00
[woocommerce_product_upsells]
This is a service to cut your factory Glock slide for a RMR pattern optic (aftermarket slides cut with prior approval). The cut will be .125" deep. The front bosses WILL be milled in to locate the optic as this is the way the optic was designed to be located and this ensures universal fitment for any RMR pattern optic that is in spec. The threaded holes will not break into any of the internal parts of the slide. The right threaded hole will be shallower than the left so that it does not interfere with the extractor pin. The holes are threaded 6-32 and for a RMR you will need 6-32 x 3/8 screws. For a Holosun we recommend using the factory screws that come with the optic, the screw we provide will work with a Holosun, but would need to be slightly shortened.
**RMR Screws will be included for free, if you are planning to mount a Holosun optic, please use the screws that come with the Holosun.
Recommended Sights for Lower 1/3 Co-witness: Angry Bear Arms Suppressor Height Sights OR Ameriglo XL Suppressor Height Sights
IRON LOCATION: You may choose to keep your irons in the factory location, which will mean the optic sits in front of the rear iron sight. We also offer an iron sight relocation service where the optic will be cut to the rear of the slide and the iron sight dovetail will be recut in front of the optic.
COATINGS: There is also an option to add Cerakote or bluing to the slide. We offer the Cerakote in Graphite Black, FDE, ODG, Tungsten and Burnt Bronze and it will be applied to the entire slide. The cold bluing will be applied to just the area we cut and your factory finish will remain everywhere else. This type of finish is not as consistent and visually appealing as the Cerakote, but offers some protection for the bare metal. If the Cerakote option is chosen, we will remove your channel liner and install a new one after coating. We also now offer a black nitride coating. The nitride is a much harder finish than the Cerakote and will not wear as quickly. It is similar to many factory coatings and offers a clean uniform black look. We work with a local company to offer the nitride, so lead times are not guaranteed. Estimated 3-4 weeks total turnaround.
THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only, we are not an FFL and cannot handle frames! We will complete the cut and/or Cerakote and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.
TIMELINE: Once we receive your slide, we will complete the work in 3 business days (Mon-Fri) or less and get it shipped back to you. This includes coating.
PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us, failure to follow this will result in increased turnaround time.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by GLOCK. GLOCK does not warrant or represent that
this product is compatible with GLOCK pistols.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 11 × 4 × 3 in |
| Model | Glock 17, Glock 19, Glock 19x, Glock 20, Glock 21, Glock 22, Glock 23, Glock 26, Glock 27, Glock 29, Glock 30, Glock 31, Glock 32, Glock 33, Glock 34, Glock 35, Glock 36, Glock 37, Glock 38, Glock 39, Glock 45 |
| Iron Sight Location | Keep Factory Location, Move In Front of Optic |
| Coating | None, Black Nitride (Increased Lead Time), Blue the Cut Area, Graphite Black Cerakote, FDE Cerakote, OD Green Cerakote, Tungsten Cerakote, Burnt Bronze Cerakote |
23 reviews for Trijicon RMR Footprint Optic Cut (Also Fits Trijicon SRO & Holosun 407c/507c/508t) for Glock
You must be logged in to post a review.
Blake –
Their work is really good. Turn around time from when I sent to when I got back was I think only 7 days. These dudes (or this dude, not sure how many there are) are awesome. Craftsmanship was great, they answered my questions no problem and I’m super pleased. Will be sending through more slides soon. If you want a well done optic cut and want it in a reasonable time at a good price this is the way and what I will be recommending
Nick N –
Had my slide cut for a holosun 407c fits perfect, looks great. Shipped it out on a Saturday morning had it back in my hands on Thursday. Top notch work will use again for sure.
Kore S –
Sent my slide to be cut for a 407c and coated OD Green. Not only were my expectations exceeded quality wise, the turnaround time was also incredible/unheard of. Shipped over the weekend and got it back in one week flat. Professional work at a great price with an unbeatable turnaround time. Also answered any questions I had and customer service was great – I’m sure I was a bit of a pain in the ass. Will definitely be using in the future and recommending to friends. Thank you again
Alex B –
Had my Glock 20 slide cut for a Holosun 507T and had it cerakoted to FDE. Received it in about a week. Excellent Craftsmanship and the cerakote job was very well done. Popped on my 507T it fit perfectly and my slide still worked flawlessly.
Eli –
Very impressed with WMW. Sent in my G34 for the cut and cerakote, got it back in 5 days here in Southern California. 5 days total after they received it!!!!! That’s crazy good turnaround time from West coast to East coast and back.
Cut was good and the cerakote job is good quality. Currently have a Holosun 507C X2 installed. I will definitely recommend WMW to anyone looking to get their slide cut for an optic here in Southern California. Definitely will send my future slides here for sure!
Matt –
Incredible work for an absolutely incredible price! The optic fits perfectly and I couldn’t be happier about how it turned out.
Mark G. –
The quality of work is unmatched for the price. Had my slide back exactly one week after I shipped it. The machining (RMR + front serrations) is incredibly clean and the Cerakote (OD Green) is beautiful and even. 100% chance I’ll be recommending Wagner to my friends and using them for all my side work in the future.
Dan –
I had the pleasure of meeting Nate locally to have a RMR cut completed. Solid guy doing quality work and providing customer service and turn around times that are above expectations amongst companies doing optic cuts. Highly recommended for quality work and quick turn around.
Ken –
The RMR cut was perfect, customer service excellent, price extremely reasonable and on top of all that the turn-around time was about 3 business days. If you are on the fence just go for it.
Derek Wright –
Excellent work, cut was clean, cerakote is awesome and thorough. And the turn around time was very fast. Great work from Wager, I highly recommend. They will be my go to from now on!
Josh –
Sent in my Glock 20 Gen 3 for a RMR cut, front serrations around the text, Trijicon suppressor height sight install, and a graphite black cerakote. I got it back today and could not be any happier. It’s absolutely flawless work. WMW even installed the 508t I sent in with it and put a new channel liner in. Quality and timeliness were way above expectations and the price was super reasonable. I wouldn’t trust anyone else over WMW.
Jake P –
Amazing attention to detail. Turn around time was extremely quick on this. My 507c fits nicely. Only downside was the screws they sent back with the slide were too long and contacted the extractor plunger. Ended up using some that came with the optic and it fits great. Highly recommend
Kevin McPherson –
I ordered the Trijicon RMR Footprint Optic Cut (Also Fits Trijicon SRO & Holosun 407c/507c/508t) for Glock 19 gen4 and tungsten cerakote. After I shipped it I contacted them and asked them to add the front serrations around the text. I was thoroughly impressed with the timely responses to messages. I was thrilled with the finished product. I promptly reassembled the gun and installed a Holosun 507c and Timney trigger. Today I ran 175 rounds through the gun and I could not be happier. I highly recommend Wager Machine Works. Check them out on Reddit, they come very highly recommended.
Eric Monaco –
Great service all around. These guys did the rmr cut for my glock 19x. The cut Is precise and fits my holosun 407c like a glove. Excellent service. Turn around time was steller. Shipped my slide out on a Monday, they got it 2 days later, work was completed in 2 days. Had my slide back in less than a week. Other websites quoted 3-4 weeks. Really impressed with these guys. Will be getting more slides cut in the future. Will definitely recommend to friends.
Matt J. –
Sent my 1st of more than likely many slides to have these guys cut and cerakote. Work, price and time frame for work to be completed is phenomenal!!!! Top notch place!!!
Jay Zimmerman –
My cut for RMR turned out great and the nitride finish was worth the extra wait. Looks like a brand new slide. Price was also more than fair comparing to other locations. Customer service was also above and beyond for me. Would 100% recommend and will be using Wager again.
Roy –
I couldn’t be happier with the machine work and to OD Green finish done by Wager Machine Works. Also the work was completed 3 days and the price was great. I will not hesitate to recommend to anyone looking for slide work. Thanks
Kenny D –
Excellent work. Outstanding communication through the process. Had my Gen 5 g19 milled with install of ameriglo high sights I provided. Am more then pleased with the work that was done and am already deciding which of my glocks will be sent next. Thinking the 19x most likely. For sure would recommend this service for anyone who is asking.
Josh –
Couldn’t be happier. I went with the black nitride finish. Looks and feels incredible. Turnaround time is also the best in the business. Even though my order was placed during their Black Friday sale, they were able to beat their estimated 3-4 week lead time for nitride at 18 days. Very impressed. Will be using them again.
Shon –
Amazing work, Fast Shipping. Sent in my slide for an rmr cut – blued, perfect fit and no raw metal exposed! Shipping was extremely fast! Shipped 12/23, back to me on 1/2. 11 days total (9 excluding nation holidays). Recommend these guys to the fullest!
Mike –
Shipped it to Wager with a flat-rate USPS box for like $10. Sent out on Wednesday morning, they received my slide on Saturday. Work was completed and slide was sent back out by the next Wednesday (7 days from when I shipped it out). I got the slide back on Saturday morning. In just 10 days I had my slide back. Optic was mounted and torqued to 15 ft/lbs (as per Holosun’s instructions) using the hardware included from Wager and a drop of blue loctite. The quality of work is superb and if you are reading this just send the slide out already!! Go pull the barrel and recoil spring, wrap it up in some newspaper and go to USPS. It’s really that simple. I will definitely be using Wager again for any/all future builds!
Scott –
Great job on my 19X – Fast and friendly and very communicative! answered all my questions I had as a newbie to red dots! A++
wesley –
Insanely fast and amazing work, I am truly impressed. I would have paid double the price for this quality. Will definitely recommend to everyone I know.