Factory Style “C” Porting for Glock Slide and Barrel

*****If you are placing an order for both a porting job and an optic cut, select the finish that you want on this page and then select 'None' for the coating with the optic cut. The finish selected with the porting will cover the entire slide including the area machined for the optic cut.*****

This is a service for you to send in your OEM Glock slide and OEM barrel and we will machine the slide and barrel to add the popular C style porting cuts. The service INCLUDES your barrel being refinished with a new nitride treatment and the slide can either be refinished with cerakote or nitride.

Both the slide and the barrel are precision CNC machined to the same specs that the factory C models were offered with. The barrel will be ported and CNC deburred on both sides of the porting to ensure there are no functional issues and to replicate a factory porting job.

We may offer this service on other models in the future, but at this time we are only offering this for the standard 9mm models: G17, G19, G19x, G45, G47, G49. We can perform this porting cut on both MOS and standard (non-MOS) slides Gen 3-5. This is only available for OEM slides and OEM barrels, no aftermarket slides/barrels at this time.

Process: Just like sending your slide in for an optic cut, for this service you would remove the slide assembly from your pistol and you can just ship us the slide and barrel. We do not require the recoil spring. You are welcome to remove the internals of the slide and keep those with you if you desire, but if they are still present when we receive the slide, we will strip it down, bag the internals and then reinstall them after the machine work/refinishing.

Turnaround Time: Due to the nitride finish required on the barrel, this service has an estimated 2-4 week turnaround time.