Gen 2 WMW Battery Cap for Aimpoint T2 and Acro P2

BLEM update 11/28/24: We had a batch of these have some issues at the anodizer. The caps are completely functional but they did not get properly prepped before the anodize and as a result you can see scratches in the caps from the processing. These caps are 100% functional and only have cosmetic imperfections. We are selling these cheap to clear them out. We are working with the anodizer to correct the issues and hopefully with have good anodized caps soon.

This is a replacement battery cap designed for the Aimpoint T2 and Acro P2 Optics. The WMW cap will replace your OEM cap and allow for you to store a spare battery in the cap. It also does not require a special tool to remove it, thanks to the radiused knob design. It is made from 7075 Aluminum and then hardcoat anodized black.

The gen 2 cap has been redesigned to allow the use with both the T2 and Acro P2 optics. This is done by two different delrin inserts that are included with every cap. The thinner insert will be used when installing the cap on a Acro P2 and the thicker insert with the attached o-ring will be used when installing the cap on a T2 optic.

The cap assembly includes: the battery cap, T2 insert with o-ring, P2 insert and external sealing o-ring.

Due to the plastic divider design, this cap can be used with or without the spare battery in place. We also added a hole in the plastic divider so that you can see if there is a spare battery present when you remove your cap.

For the cerakote caps, you will see some small witness marks on the inside of the cap from where they were held when sprayed. This will not affect the cap in any way.

Please note: We tried to match the color of the anodized optics, but this first batch of caps came back a little glossier than we were shooting for. They match the P2 optics a little better than the T2, as the T2 optics are generally a little more matte. We have included many pictures to try to show the color installed on both optics. We are working with the anodizer to get them a little more of a matte finish for future batches.

Install instructions: Battery Cap Installation Instructions

**While this cap can fit several other optics, it was designed to work specifically for the T2 and P2 optics.

**Battery, Optic and Mount are not included in Sale*