Holosun K Footprint Optic Cut (407k/507k/EPS/RMSc) for CZ75

(8 customer reviews)


SKU: N/A Categories: ,


This is a service to cut your CZ75 slide (P01, SP01 etc) for a Holosun 407k/507k pattern optic. The cut will be .200" deep. The front bosses WILL be milled in to locate the optic as this is the way the optic was designed to be located and this ensures universal fitment for any optic that is in spec. The threaded holes will not break into any of the internal parts of the slide. The holes are threaded 6-32 and you will need 6-32 x 7/16 screws. Please note: The internals (extractor, firing pin etc) must be included on this slide, as we will need to shorten the extractor retaining pin after we cut the slide. We do not need the barrel or recoil spring. If the extractor is not included, you will be responsible for shortening it (to 3/8") yourself. Also, models with a LCI can be cut, however the LCI will no longer function after the slide has been cut as it gets partially cut away. We CANNOT cut SP01 Shadow models. The dovetail is further forward and there is not enough room on the slide for this footprint.

**Screws will be included for free. We do recommend Loctite 243 for this model slide to ensure the optic stays on tight.

Recommended Sights for Lower 1/3 Co-witness: Factory CZ sights will co-witness and if included we will reinstall them on your slide. Please note: We do our best to carefully remove the front sight, but in some cases if it is very tight it will get damaged upon removal, please consider this.

COATINGS: There is also an option to add Cerakote or bluing to the slide. We offer the Cerakote in Graphite Black, FDE, ODG, Tungsten and Burnt Bronze and it will be applied to the entire slide. The cold bluing will be applied to just the area we cut and your factory finish will remain everywhere else. This type of finish is not as consistent and visually appealing as the Cerakote, but offers some protection for the bare metal. We also now offer a black nitride coating. The nitride is a much harder finish than the Cerakote and will not wear as quickly. It is similar to many factory coatings and offers a clean uniform black look. We work with a local company to offer the nitride, so lead times are not guaranteed. Estimated 3-4 weeks total turnaround.

THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only, we are not an FFL and cannot handle frames! We will complete the cut and/or Cerakote and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.

TIMELINE: Once we receive your slide, we will complete the work in 3 business days (Mon-Fri) or less and get it shipped back to you. This includes coating.

PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us, failure to follow this will result in increased turnaround time.


DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by CZ. CZ does not warrant or represent that
this product is compatible with CZ pistols.

Additional information


P01, SP01, B, BD, Compact


None, Black Nitride (Increased Lead Time), Blue the Cut Area, Graphite Black Cerakote, FDE Cerakote, OD Green Cerakote, Tungsten Cerakote, Burnt Bronze Cerakote

8 reviews for Holosun K Footprint Optic Cut (407k/507k/EPS/RMSc) for CZ75

  1. RonBow

    – I received my cut slide back 8 days after I had sent it out. That was very nice (YMMV).
    – The bluing they did on my slide cut looks much better than the example photo here. My slide is stock black.
    – The front posts were shorter than I expected. But I accept their expert judgement that this is the right height.
    – The Holoson 407k fit perfectly and easily.
    – The 407k sits low and co-witnesses great with stock P-01 Omega sights.
    – I got about 2.5 turns with the provided screws. I believe that is enough thread contact to hold the RDS in place.
    – P-01 + Tlr-1 + 407k is such an awesome combo! They just fit perfectly together.

  2. Kenny H

    I bought my P-01 around Christmas and decided to wait for the move to send it in to get cut. This is the second slide I had Wager cut for me. It was worth the wait and the slight extra few days it took for the opening rush of orders. These guys do fantastic work, there is a reason they are consistently recommended to people looking for optic cuts.

  3. Dae C.

    They did superb job on my P-01. My hats off to you guys. Even the blued area look amazing. If your on fence about getting your CZ optic cut with these folks, don’t even hesitate. 5 star is a understatement.

  4. Jared

    Went with wager off of a recommendation and I’m very glad I did. The work is great and the turnaround time was very quick.

  5. Zach D

    Less than a week turn around and the cut/finish on my sp01 slide couldn’t be any better. Outstanding work by these guys

  6. Will

    My SP01 arrived perfectly and had a fast turnaround. Great work, I highly recommend it.

  7. Jackson

    10/10 Customer service and awesome cut. This cut sold all my friends on pistol red dots. Its low enough to perfectly co-witness and the 407k completes the gun. My only wish is that I sent off my slide sooner.

  8. Gill

    If you are waiting to have your slide milled, don’t wait any longer. This is by far the best work I have seen in a couple of my milled slides. The cut was deeper than others without interfering with the internal components. They provided the two screws long enough because the two sets that came with the EPS were shorter for the deep holes (this is very good). Don’t forget the price is cheaper than anywhere I’ve seen. The bluing on the cut is way better in person than the picture on the website. I want to keep the original finish on my P-01.

Add a review